Level gauge according to the buoyancy principle and the principle of magnetic coupling work. When the measured level in the container movements, the dominant tube level gauge also will lift the float, the permanent magnet in the float passes through the magnetic coupling to the scene indicator turned red column driver switch 180 °, when the liquid bits increases, the column turned from white to red, when the liquid level when the column turned from red to white, indicator of red and white for the container industry is located in the actual height of the media level, in order to achieve level instruction . Scope UHZ-517F60 turned column magnetic level gauge system for large-scale petrochemical storage tank level measurement, especially for heavy oil, tar, crude oil, resin, liquid level detection of high-viscosity media. Level indicating a clear, easy to observe, if I produced matching transmitter and remote control switch, can be easily remote level indicator, detection, recording, control and alarm. Technical parameters Measuring range: 2000 ~ 20000mm, the center is far from over 8000mm or conditions were not lost over the length of the segment level meter can be manufactured. Working pressure: Operating temperature: -20 ~ 200 ℃ Accuracy: ± 10mm Medium Density: ~ Medium density difference: ≥ 650kg/m3 (measured dielectric-bit) Environmental vibration: ≤ 25Hz frequency amplitude ≤ Following speed: ≤ Medium viscosity: ≤, the viscosity of the medium or low temperature measurements easy to crystallize the media, the choice of heat level gauge dips Process connection: Top Installing Lan: DN150 Flange Standard: HG20592-20635-97 Material: bypass tube: 1Cr18Ni9Ti 316L Float: 1Cr18Ni9Ti 316L