Scope: UHZ-517C10 is the most common side-mounted magnetic level gauge turned columns, the working temperature below 200 ℃ level measurement of liquid medium. Liquid medium for container level, industry-bit measurement. In addition to on-site instruction, but also with remote transmitter, alarm (control) switch, detection complete. Indicates new, intuitive readings, eye-catching, observing the direction indicator to change according to the user point of view. Measurement range, from tank height restrictions. Instructions completely separate institutions and the measured medium, thus sealing, high reliability, safe to use. Simple structure, easy installation, low maintenance costs. Technical parameters: Measuring range: 150 ~ 8000mm, 8000mm over the center, or transport from the conditions do not permit more than the length of the segment level meter can be manufactured Accuracy: ± 10mm Working pressure: Operating temperature: UHZ-517C10-type: -20 ~ 100 ℃ UHZ-517C10A type: -20 ~ 200 ℃ Medium Density: ~ g/cm3 Medium density difference: ≥ 150kg/m3 (surveying bit) Environmental vibration: ≤ 25Hz frequency amplitude ≤ Following speed: ≤ Medium viscosity: ≤ for medium or high viscosity at low temperature crystallization medium is easy, the choice of heating jacketed liquid level gauge. Process connection: Bypass the side mounting flange: DN25,, Flange Standard: HG20592 ~ 20635-97 other flange standards, please specify the user. Material: Bypass tube: 1Cr18Ni9Ti; 304; 316L Float: Titanium